1. Remove old sealants and dirt from the place of application; degrease using TECHNOSOL® if necessary.
2. Check whether the delivery nozzle is clear before application, clean it if necessary.
3. The putty should be applied at temperatures from –30 °C up to 55 °C.
4. Use a tube, or your finger wetted in a detergent solution to shape the radius.
5. After work, let about 1 cm of the putty stick out from the delivery nozzle.
- Excellent chemical resistance
- Does not contain silicone
- Range of operational temperatures from –55 to 285 °C
- Levels unevenness and damage of surfaces
- Excellent sealing properties
- High adhesion
- Long life
| Treatment temperature |
–30 až +55 °C |
| Time to create the non-sticky peel (20 °C) |
10 min. |
| Thermal stability |
–55 až +285 °C (310 °C for a short time) |
| Ignition point (non-vulcanized) |
> 460 °C (DIN 51794) |
| Contractility |
2.5 % (DIN 52451) |
